（資料分析和製圖軟體）OriginLab OriginPro v9.0 SR2

小工具
小工具提供了一個快速簡便的方法來進行探索性分析，使用感興趣區功能變數（ROI）。在這個版本中引入的小工具快速飛度，統計，整合，FFT，和上升時間。
該快速飛度小工具「容許您啟動先進NLFit工具，使用相同的功能和參數值，裝修過程中提供更多的控制。

批處理
批處理工具的強大功能延伸，容許使用者處理多個檔案或資料集的分析範本。
使用者只需要處理一個檔案來建立分析範本自訂匯入設定，所需的分析結果，報告分析結果參數選取特殊的工作表。
然後，該工具容許使用者選取多個磁碟檔案或多個資料集的項目，對他們進行批次分析。
中底，一個報告表，使用者特殊的分析結果合併產生的每個檔案或資料集。
多個檔案或datsets也可以多次匯入到現有的工作簿視窗，其中包括自訂分析設定和總結報告表。

批匹克分析（臨）
OriginPro此功能容許使用者perfom峰擬合一個資料集，他們的自訂設定儲存為一個主旨檔案，然後執行批處理峰分析選取的多個資料集，在項目中使用自訂主旨。將建立一個清單資料集名稱和峰值分析結果如峰的積分結果，或多個峰值效能，根據主旨儲存在山頂分析目的的​​總結報告表。

幻燈片放映圖
現在，您可以檢視在您的項目中，或在一個特定的子資料夾中的所有圖表，在一個全螢幕幕幻燈片放映。可定制的幻燈片，打在一個迴圈或結束時，上圖顯示。自訂鍵條目，可以使用幻燈片放映期間，內含選項來關閉速度模式如果存在的話，現用的顯示的圖形視窗。
以設定幻燈片的順序，使用新推出的Project Explorer中的幻燈片的順序列。

我的最愛資料夾「功能，此功能結合，可以讓使用者很容易地收集在一起觀看或向同事提出一個項目所需的全部圖形。

我的最愛資料夾和項目資源管理器快捷鍵
Project Explorer中的任何資料夾中可以新增到任何產地視窗類型，如圖表，工作表或矩陣的捷徑。 「我的收藏」資料夾也已出台，容許使用者右鍵點擊任何視窗快速新增到「我的收藏」資料夾的捷徑。這可以輕鬆地項目組織的重要視窗和圖形，然後可以結合建立自訂演示文稿的幻燈片放映功能。

圖匯出到PowerPoint
除了檢視圖表幻燈片放映，您還可以匯出所有的圖，在項目或在任何特定的子資料夾Microsoft PowerPoint檔案。出口的順序可以設定用於設定幻燈片播放順序使用相同的控制。控制提供用於指定頁大小的百分比為單位的垂直和水平偏移量和大小，插入到PowerPoint幻燈片圖。

密碼保護和審計日誌
可以保護地項目，在8.1版本中使用的密碼。使用者還可以開啟的審計日誌，維護日誌誰救了項目和在什麼時候。審計日誌可以選取一個單獨的密碼保護，讓一個經理把上市的審計日誌和檢查，以檢視該項目的活動。

密碼保護和審計日誌的時間戳記，與地儲存在項目中使用自訂的SQL查詢從資料庫中匯入資料的能力相結合，使這些新功能的電子記錄儲存。這些功能是非常重要的具有特定安全指引，例如美國FDA規定21 CFR Part 11要求政府機構送出原產項目。

新的圖形類型
超過60支援的圖表類型，以補充現有的陣列，正在引入新的地8.1：

三元等高線圖。該地塊採用了第四列的Z值來確定的輪廓為XYZ三元資料。自訂選項內含平滑，以及新引進的主要和次要的水位線控制和增強支援調色板。

威布爾概率劇情。的Weibull概率圖的顯示，以確定如果資料是從威布爾分佈的百分位。資料，是真正的威布爾將繪製在圖上為一條直線。地繪製參考線自動Weibull分佈參數的基礎上，你可以指定或讓原產地估計從資料。

劇情WINDROSE。風玫瑰圖元素相結合的二維極線圖，條形圖，顯示定向資料是非常有用的。這是最經常用於顯示在風的速度和方向的變化。

新的範本。已加入了新的圖形範本，可以輕鬆地共享的X軸和多個彩色編碼Y軸的偏移量相同的圖形繪製多個資料集。

等高線圖定制
已經做了增強等高線圖的自訂選項。現在，使用者可以設定輪廓的主要和次要的水平，並選取性地只顯示等高線在大的層次。這容許以平滑彩色變化的等值線圖，但在同一時間沒有太多的等高線，從而減少雜波。

已作出改進的等高線圖應用調色板。一旦已指派一個調色板，它可以記得這麼源資料的變化將導致重新申請相同的調色板。任何或所有輪廓線對應資料（​​XY），現在可以提取到工作表中。

資料重排
通過使用一個或多個列組變量組成的多個混合組資料，現在可以取消堆疊單獨列集。取消堆疊一旦分組資料，圖表和分析，可以具有更大的彈性。

資料縮減
減少資料相繼出台了多個新的工具。這些措施內含跳繩，如刪除每隔一行行刪除工具，為減少重複X值的資料和工具。

重複的復原工具容許用於指定多少數量用於取代Y值，如平均值，最小值，中位數或總和。

資料減少（臨）
OriginPro減少資料提供了額外的工具。其中內含一個工具，以減少資料均勻分佈的X值，X值的子組統計資料的基礎上減少資料的一個工具。
這兩個工具都提供了多種方法來決定如何配置減少資料。該工具還提供其他的結果的預覽視窗。

信號抽取（臨）
此工具為您提供的能力，減少資料由特殊的因素，一個可選的過濾器規範。過濾選項內含搬移平均線或有限脈衝響應。

上升和下降時間分析（臨）
這個工具可以用來測量信號的上升和下降時間。互動小組在圖形上可以用來指定範圍內的利益。

信號包絡（臨）
此工具計算的信號的包絡線。提供了一些選項，用於計算上限或下包絡線，或兩者兼而有之。的平滑選項容許使用者指定要用於平滑的點的數量也被提供。

表面面積（臨）
矩陣在XYZ的格式在工作表中的資料組織，使用該工具可以計算表面面積。

自訂選單
自訂選單組織者工具可用於自訂現有的選單項開啟所選項目，或加入自己的額外的主選單項目的定制軟體，以滿足最終使用者的特定需求。
可以建立多個選單配置檔並儲存，並與其他使用者共享。
分享這樣的選單配置檔支援的組資料夾。
利用此功能可以在組織，為所有使用者提供一個自訂的，一致的介面，內含軟體，儀器儀表，或自訂介面。

Lab
Ta
lk功能支援
支援使用者自訂多個參數的功能已被新增到產地LabTalk腳本語系。功能可以很容易定義和在腳本中使用如從功能繪圖介面。

生產率
批次處理與匯總報告分析TemplatesTM
批次峰值分析多個資料集使用主旨
批次裝修高峰的多個資料集使用主旨
在項目資源管理器中的收藏夾資料夾
在任何資料夾層級圖表幻燈片放映
在多台電腦上使用的使用者資料夾共享檔案
改進升級使用者的檔案傳輸對話框
主旨支援的工作表和矩陣表
主旨支援儲存對話框設定
重新計算資料或參數變化的結果
自訂報告表進行重複分析分析TemplatesTM
可折疊式表綜合報告
重新匯入資料檔使用儲存的設定，更新工作表或矩陣資料
使用組資料夾的共享檔案
自動儲存到暫存檔「項目
圖的主旨支援
類似資料的重複匯入，匯入精靈過濾器
批次列印選取的工作表，圖表，佈局Windows

圖表類型
三元等高線圖
內含威布爾分佈概率圖
Q-Q陰謀
散佈中央劇情
二維黑白餅圖
WINDROSE簡介：生成從原料或分級資料
多個Y軸劇情的
從XYZ資料使用三角測量的等高線圖
極地等高線圖
疊放使用Y偏移量線劇情
散點圖矩陣劇情
插入圖形和偏移軸範本
影像圖的輪廓線，圖像直方圖
史密斯？圖表
3D餅圖
列散點圖
XYXY向量（尾頭資料）
基本的2D，3D，輪廓和統計

圖形定制
掩蔽支援線圖
多個Y軸定制
在圖形層或頁面級的更新或重建傳奇
交換軸刻度，LN（LN（1-X）），登入Weibull分佈圖
遺漏值和格線略過支援3D表面圖
3D酒吧圖的彩色映射使用Z值
主要和次要級支援3D曲面和等高線圖
改進的支援等高線圖的調色板
在劇情中的單個資料點選取和自訂
加入或修改圖層標題文字物件附加層
提取任何或所有等高線的資料點
對齊和尺寸多圖層和文字使用物件編輯工具列
Strecth任何三維圖形軸改變長寬比
旋轉三維圖形的層
使用柱長姓名，單位，和軸標題和圖例註釋
加入表圖，參數值可能會被連結到工作表
從成圖作為一個表的工作表的複製和貼上表
工作表註釋2D瀑布圖中每條曲線的參數行
自訂邊界輪廓圖使用DataSet
劇情同柱多次，如不同的範圍，在單一圖形層
速度模式對話框控制速度模式在項目設定圖
圖中所有圖層自動建立一個單一的傳說
複製和貼上一個圖表元素的格式到另一種
分組資料格式自訂的增量清單和調色板
使用樣式工具列編輯許多資料圖屬性
圖例顯示，個別編輯的資料點
調色板應用到圖像矩陣資料
手動指定刻度線和整個軸的刻度標籤
色階物件支援標籤增量
偏移繪製重複點
列印圖形，多頁
內建符號延伸集（約100）
個別輪廓線和電平控制
使用彩色變化或符號尺寸是另一個維度
使用者定義的符號，使用點陣圖

進出口
在項目資源管理器中的所有圖表匯出電源點
多頁的PDF檔案匯出工作表
ASCII資料匯出到現有檔案追加或取代選項
Unicode的ASCII，CDF和HDF5格式的資料匯入到
匯入二進位2D陣列
圖形化地構造SQL查詢，儲存命名的SQL查詢
新的匯入選項：NI DIAdem的的膜片鉗pClamp 2.0 / TDM，ETAS密度板，JCAMP-DX，建立NetCDF
匯入精靈：多個分隔設定支承
去掉引號內進口CSV資料檔匯入精靈：選取
匯入精靈：改進和擴大可變提取
ASCII和二進位匯入精靈在匯入過程中提供可視化反饋
地使用LabVIEW的VI地傳送資料
傳輸資料從MATLAB？和匯入工作區資料
拖曳和拖放資料檔從Windows資源管理器探源
匯入資料從Minitab，SIGMAPLOT？和熱銀河？ SPC檔案
匯入和匯出圖像檔案（光柵）
圖形輸出格式：AI，CGM，EPS，TIFF，PDF，JPEG，EMF，PSD，及更多

資料處理
新的搜尋和取代工具
使用分組變量拆散工作表列
重新計算工作表資料提取的支援
改進矩陣網格化的工作表
刪除重複的列中的資料
修剪工作表中的遺漏值
根據X值合併XY資料
資料填充：拖曳填充柄自動填充資料，重複或延長值
啟用腳本設定列值「支援範圍變量
自訂日期及時間格式儲存工作簿
彩色圖像分割成RGB通道
強度/彩色調節圖像
空間圖像濾波器（模糊，噪聲，銳化，邊緣檢驗）
翻轉，圖像旋轉，剪下，汽車內飾
分類資料支援（名義和序）
在矩陣視窗圖像的資料檢視
隨機和定期XYZ到矩陣轉換
2D分級工作表資料
移調工作表，或在剪貼簿貼上
資料分析

支援X-錯誤線性擬合

資料透視表功能
降低資料：刪除每N點或刪除點在特殊的X增量
刪除重複的資料點選項
跨多列「或」曲線「標準化
面板工具的上升或下降時間分析
矩陣資料計算表面面積
建立上下包絡曲線

設定列值的新功能，內含日期/時間和字串函數
支援週期資料在2D分級
旋轉二維高斯函數的二維曲面擬合
搜尋鑑於Y，X坐標，一個曲線
面板工具的整合和FFT分析圖表DATAPLOT
多元線性回歸方程的部分槓桿劇情
更好的支援和更多的功能操作複數
改進全球擬合非線性擬合
設定樹結構的標準化的分析工具
擬合函數主辦
用於分析的分析標示，以指示範圍
改進的殘差分析與其他殘差圖
指令層級訪問資料分析程式
基本的圖像處理
線性，多項式，非線性擬合改進Find-X/Find-Y工具
非線性表面/矩陣擬合新的Find-Z工具
曲面擬合和三維空間插值
支援平滑曲線分化工具
增強圖像分析（的圖像數學，模式轉換，彩色為RGB）
延伸統計（參數/非參數假設檢驗，生存分析
重複測量單向和雙向方差分析
進階信號處理：2D FFT，短時傅裡葉變換，小波
自動更新工作表列計算
自動NLSF參數起始化
自動擬合比較，使用F-檢驗
定義擬合函數使用地C
正態性檢驗（夏皮羅 – 威爾克）
單向和雙向方差分析一個樣品和兩樣本t-檢驗
生存分析（Kaplan-Meier法，Cox比例風險）
低通，高通，帶通，帶阻，噪聲臨界值濾波器
峰值分析：峰，峰進行積分
峰值分析：適合多峰

使用者介面
在項目層級的密碼保護
項目的審計日誌儲存，可選的密碼保護
Unicode支援文字標籤
選單定制：加入新的選單項或刪除現有的
在項目資源管理器中的Windows快捷鍵
Project Explorer中新的幻燈片索引列圖和佈局頁
資料標示和鎖的工具列
GUI設定值「中定義變量
全螢幕檢視圖表，帶有長寬比保持
在工作​​表屬性的更多選項對話框格式化工作表
全球設定為有效位數
工作簿和矩陣的多張和豐富的文字單元格格式
長名稱支援Windows和工作表列
列標題上的走勢圖顯示小圖快速檢驗資料
內嵌圖形，圖像，以及在工作表單元格中的注意事項
在工作​​表單元格中插入連結到其他細
胞，內含報告表
採樣間隔支援X-列
工作簿/列屬性和元資料的工作簿主辦面板
拖曳範圍選取自動延長或重複資料
拖放表中刪除或新增到表，簿
點擊並拖曳到工作表和矩陣調整行高和列寬
最適列高大小表和矩陣列選項
一個矩陣表的多個矩陣中的對象
的游標工具和資料訊息盒支援多個游標
工具來註釋一個特定的資料點
區功能變數資料選取器/面膜工具
分類跳出工具列按鈕
鎖定圖示輸出列的指示重新計算模式：手動或自動
分析結果預覽對話框
快速說明視窗帶關鍵字搜尋
選項切換介面語系
OPX檔案格式與新新包裝/解包工具
控制+選取非相鄰的工作表列
在位文字編輯
點擊並拖曳以調整大小和旋轉文字和圖形物件
繪圖工具，內含保利線，寫意，多邊形，免費的表格
劇情設定對話框簡化繪製資料從多個工作表
圖形範本庫
格式支援多個選取物件
物件格式（風格）工具列（彩色，填充圖案，邊框類型，邊框寬度）
文字格式「工具列（字型，大小，粗體，斜體，下劃線，SUB /標，希臘）
舉辦大型的項目專案資源管理器

應用程式連線
自動化伺服器支援
數學連結
Matlab的GUI控制台支援地和Matlab之間的資料傳輸
LabVIEW的連線：改進的子VI和案例

OriginLab produces professional data analysis and graphing software for scientists and engineers. Our products are designed to be easy-to-use, yet have the power and versatility to provide for the most demanding user.
Origin is an easy-to-use software application that provides powerful data analysis and publication-quality graphing capabilities tailored to the needs of scientists and engineers. Origin offers unique peak-analysis and curve-fitting capabilities, over 60 customizable graph types, and analysis templates, all within a tightly integrated workbook environment.
OriginPro offers all of the features of Origin plus extended analysis tools for statistics, including several nonparametric tests and repeated-measures ANOVA, peak-fitting and 3D surface fitting, image processing, and signal processing.

Gadgets
Gadgets provide a quick and easy way to perform exploratory analysis using a region of interest (ROI). Gadgets introduced in this version are Quick Fit, Statistics, Integration, FFT, and Rise Time. The Quick Fit gadget allows you to launch the advanced NLFit tool using the same function and parameter values, offering more control of the fitting process.

Batch Processing
The Batch Processing tool extends the power of Analysis Templates by allowing users to process multiple files or datasets. Users need only to process one file to create an Analysis Template with custom import settings, desired analysis results, and a worksheet that specifies which analysis result parameters to select for reporting. The tool then allows a user to select multiple disk files, or multiple datasets in the project, and performs batch analysis on them. In the end, a report sheet that consolidates the user-specified analysis results is generated from each file or dataset. Multiple files or datsets can also be repeatedly imported into an existing workbook window containing custom analysis settings and a Summary Report sheet.

Batch Peak Analysis (Pro)
This feature allows OriginPro users to perfom peak fitting of one dataset, save their custom settings as a Theme file, and then perform batch peak analysis of multiple selected datasets in the project using the custom theme. A summary report sheet will be created that lists the dataset name and results from the peak analysis such as peak integration results, or multiple peak properties, depending on the Peak Analyzer goal saved in the theme.

Slide Show of Graphs
You can now view all graphs in your project, or in a particular subfolder, in a full-screen slide show. The slide show can be customized to play in a loop or end when last graph is displayed. Custom key entries can be used during the slide show including options to turn off speed mode if present, or go to the currently displayed graph window. The order of the slides can be set using a newly introduced slide order column in Project Explorer.

This feature combined with the Favorites Folder feature allows for user to easily collect together all desired graphs in a project for viewing or for presenting to colleagues.

Favorites Folder and Project Explorer Shortcuts
Shortcuts to any Origin Window type such as graph, worksheet, or matrix can be added to any folder in Project Explorer. A Favorites folder has also been introduced, allowing user to right click on any window to quickly add shortcut to Favorites folder. This allows for easy organization of key windows and graphs in your Origin Project, and can then be combined with the Slide Show feature to create custom presentations.

Export Graphs to PowerPoint
In addition to viewing graphs as a slide show, you can also export all graphs in the project or in any particular subfolder to a Microsoft PowerPoint file. The order of export can be set using same control used for setting slide show order. Controls are provided for specifying vertical and horizontal offsets and size in units of percentage of page size, for inserting the graph into the PowerPoint slides.

Password Protection and Audit Log
Origin Projects can be protected in version 8.1 using a password. User can also turn on an Audit Log which maintains a log of who saved the Project and at what time. The Audit Log can optionally be protected by a separate password, allowing for a manager to turn on the audit log and check the listing to view activity on the project.

The new features of Password Protection and Audit Log time stamps, combined with Origin's ability to import data from databases using customizable SQL queries saved within the Project, allows for electronic record keeping. These features are important for submitting Origin Projects to Government Agencies that have specific security guidelines such as to the US-FDA which requires 21
CFR Part 11 compliance.

New Graph Types
To complement the existing array of over 60 supported graph types, the following new ones are being introduced in Origin 8.1:

Ternary Contour Plot. This plot utilizes a fourth column of Z values to determine the contours for XYZ ternary data. Customization options include smoothing, and the newly introduced major and minor level contour controls and enhanced support for color palettes.

Weibull Probability Plot. The Weibull probability plot displays percentiles in order to determine if the data could be from a Weibull distribution. Data that are truly Weibull will plot as a straight line on the graph. Origin plots the reference line automatically, based on the Weibull parameters, which you may specify or let Origin estimate from the data.

Windrose Plot. The Windrose plot combines elements of a 2D polar graph with a bar chart, and is very useful for displaying directional data. It is most often used to display variations in wind speed and direction.

New Templates. New graph templates have been added to easily plot multiple datasets in same graph with shared X axis and multiple color-coded Y axes with offsets.

Contour Plot Customization
Enhancements have been made to customization options for contour plots. Users can now set major and minor levels for contours, and optionally only display contour lines at major levels. This allows for a contour plot with smooth color variations, but at the same time not too many contour lines, thus reducing clutter.

Improvements have been made to applying color palettes to contour plots. Once a palette has been assigned, it can be remembered so that changes to the source data will result in reapplication of the same palette. Data (X-Y) corresponding to any or all contour lines can now be extracted to a worksheet.

Data Rearrangement
Data consisting of multiple mixed groups can now be unstacked to separate sets of columns by using one or more columns as group variables. Once grouped data is unstacked, graphing and analysis can be performed with more flexibility.

Data Reduction
Multiple new tools have been introduced for data reduction. These include a tool for deleting rows by skipping, such as deleting every alternate row, and a tool for reducing data with duplicate X values.

The duplicate reduction tool allows for specifying what quantity to use for replacing Y values, such as mean, min, median or sum.

Data Reduction (Pro)
OriginPro provides additional tools for data reduction. These include a tool to reduce data to evenly spaced X values, and a tool to reduce data based on subgroup statistics of X values. Both tools provide multiple methods for deciding how to distribute the reduced data. The tools also provide a preview window of the results.

Signal Decimation (Pro)
This tool provides you with the ability to reduce data by a specified factor, with an optional filter specification. The filter options include moving average or finite impulse response.

Rise and Fall Time Analysis (Pro)
This tool can be utilized to measure rise and fall time of signals. An interactive panel can be used to specify the range of interest on the graph.

Signal Envelopes (Pro)
This tool computes envelope of a signal. Options are provided for computing either upper or lower envelope, or both. A smoothing option is also provided allowing user to specify number of points to be used for smoothing.

Surface Area (Pro)
Surface area can be computed using this tool with data organized in a matrix or in XYZ format in a worksheet.

Custom Menus
The Custom Menu Organizer tool can be used to customize existing menu items by turning selected items off, or to add your own additional main menu items for tailoring the software to meet the specific needs of your end user. Multiple menu configuration files can be created and saved, and shared with other users. Sharing such menu configuration files is supported with the group folder. This feature can be utilized in organizations to provide a custom, consistent interface for all users, or to customize the interface for including the software with instrumentation.

LabTalk Function Support
Support for user-defined functions with multiple parameters has been added to Origin's LabTalk scripting language . Functions can be easily defined and used in script such as from the function plotting interface.

**********************************************************************

Productivity
Batch Processing with Summary Report Using Analysis TemplatesTM
Batch Peak Analysis of Multiple Datasets Using Theme
Batch Peak Fitting of Multiple Datasets Using Theme
Favorites Folder in Project Explorer
Slide-Show of Graphs at Any Folder Level
Share Files Using User Files Folder Across Multiple Computers
Improved File Transfer Dialog for Upgrade Users
Theme Support for Worksheets and Matrix Sheets
Theme Support to Save Dialog Settings
Recalculation of Results on Data or Parameter Change
Analysis TemplatesTM with Custom Report Sheets for Repeat Analysis
Consolidated Reports with Collapsible Tables
Re-Import Data Files Using Saved Settings, to Update Worksheet or Matrix Data
Share Files Using Group Folder
Autosave Projects to Temporary File
Theme Support for Graphs
Import Wizard Filter for Repeat Import of Similar Data
Batch Print Selected Worksheets, Graphs, and Layout Windows

Graph Types
Ternary Contour Plot
Probability Plot Including Weibull Distribution
Q-Q Plot
Scatter Central Plot
2D Black & White Pie Chart
Windrose Plot: Generated from Raw or Binned Data
Multiple Y Axes Plot
Contour Plot from XYZ Data Using Triangulation
Polar Contour Plot
Stacked Lines Plot Using Y-Offset
Scatter Matrix Plot
Inset Graph and Offset Axes Templates
Image Graphs with Profile Lines, and Image Histograms
Smith? chart
3D Pie Chart
Column Scatter Graphs
XYXY Vector (Tail-to-Head Data)
Basic 2D, 3D, Contour, and Statistics

Graph Customization
Masking Support in Line Plots
Multiple Y Axes Customization
Update or Reconstruct Legend at Graph Layer or Page Level
Double-Log Reciprocal Axis Scale, ln(-ln(1-x)), for Weibull Plot
Missing Value and Grid-Line Skip Support for 3D Surface Plots
Color Mapping of 3D Bar Plots Using Z Values
Major and Minor Level Support for 3D Surface and Contour Plots
Improved Support for Color Palettes for Contour Plots
Select and Customize Single Data Points in a Plot
Add or Modify Layer Title Text Object Attached to Layer
Extract Data Points for Any or All Contour Lines
Align and Size Multiple Layers and Text Using Object Edit Toolbar
Strecth Any 3D Graph Axis to Change Aspect Ratio
Rotate 3D Graph Layer
Use Column Long Name, Units, and Comments for Axis Titles and Legend
Add Tables to Graphs, Parameter Values May Be Linked to Worksheets
Copy-and-Paste Table from Worksheet into Graphs as a Table
Worksheet Parameter Row for Annotating Each Curve in 2D Waterfall Graphs
Custom Boundary for Contour Graphs Using Datasets
Plot Same Column Multiple Times, Such as Different Ranges, in a Single Graph Layer
Speed Mode Dialog for Controlling Speed Mode Settings of Graphs in the Project
Automatically Create a Single Legend for All Layers in Graph
Copy and Paste the Format of One Graph Element onto Another
Customize the Format Increment Lists and Color Palettes for Grouped Data
Edit Many Data Plot Properties Using the Style toolbar
Legend Displays Individually Edited Data Points
Apply Color Palette to Image View of Matrix Data
Manually Specify Tick Marks and Tick Labels for an
Entire Axis
Color Scale Object Supports Label Increments
Offset Plotting of Duplicate Points
Print Graph to Multiple Pages
Expanded Set of Built-In Symbols (Approximately 100)
Individual Contour Line and Level Control
Use Color Variations or Symbol Size to Represent Another Dimension
User-Defined Symbols Using Bitmaps

Import and Export
Export All Graphs in Project Explorer to Power Point
Export Worksheet as a Multi-Page PDF Document
Export ASCII Data to Existing File with Append or Replace Options
Import Data in Unicode ASCII, CDF, and HDF5 Formats
Import Binary 2D Array
Graphically Construct SQL Queries, Save Named SQL Query
New Import Options: pCLAMP 2.0, NI DIAdem/TDM, ETAS MDF, JCAMP-DX, NetCDF
Import Wizard: Multiple Delimiter Suppor
Import Wizard: Option for Removing Quotes within Imported CSV Data Files
Import Wizard: Improved and Expanded Variable Extraction
ASCII and Binary Import Wizard Provides Visual Feedback During Import
Send Data to Origin Using LabVIEW™ VIs for Origin
Transfer Data From MATLAB? and Import Workspace Data
Drag-and-Drop Data Files from Windows Explorer into Origin
Import Data From MINITAB?, SigmaPlot?, and Thermo Galactic? SPC Files
Import and Export Image (Raster) Files
Graph Export Formats: AI, CGM, EPS, TIFF, PDF, JPEG, EMF, PSD, & More

Data Handling
New Find and Replace Tool
Unstack Worksheet Columns Using Grouping Variables
Recalculate Support for Worksheet Data Extraction
Improvements to Worksheet to Matrix Gridding
Remove Duplicate Data in a Column
Trim Missing Values in a Worksheet
Merge XY Data According to X Values
Data Fill: Drag Fill Handle to Auto-Fill Data, Duplicate or Extend Values
Script-Enabled Set Column Values Dialog with Range Variable Support
Custom Date and Time Formatting Saved with Workbook
Split Color Image Into RGB Channels
Intensity/Color Adjustment for Images
Spatial Image Filter (Blur, Noise, Sharpen, Edge Detect)
Image Rotate, Flip, Shear, Auto Trim
Categorical Data Support (Nominal and Ordinal)
Image View of Data in Matrix Window
Random and Regular XYZ to Matrix Conversion
2D Binning of Worksheet Data
Transpose Worksheet, or upon Clipboard Paste
Data Analysis

Linear Fit with Support for X-Error

Pivot Table Feature
Reduce Data: Remove Every Nth Point or Remove Points at a Specified X Increment
Remove Duplicate Data Points Option
Normalization Across Multiple Columns or Curves
Panel Tool for Rise- or Fall-Time Analysis
Compute Surface Area of Matrix Data
Create Upper and Lower Envelopes for Curves

New Functions for Set Column Values Including Date/Time and String Functions
Support for Periodic Data in 2D Binning
Rotated 2D Gaussian Function for 2D Surface Fitting
Find X Coordinate, Given Y, for a Curve
Panel Tools for Integration and FFT Analysis of Dataplot in Graph
Partial Leverage Plot in Multiple Regression
Better Support and More Functions for Manipulating Complex Numbers
Improved Global Fitting in Nonlinear Fitting
Standardized Analysis Tools with Tree Structure for Settings
Fitting Function Organizer
Analysis Markers to Indicate Range Used for Analysis
Improved Residuals Analysis with Additional Residuals Plots
Command-Level Access to Data Analysis Routines
Basic Image Processing
Improved Find-X/Find-Y Tool for Linear, Polynomial, and Nonlinear Fitting
New Find-Z Tool for Nonlinear Surface/Matrix Fitting
Surface Fitting and 3D Interpolation
Support for Smoothing in Curve Differentiation Tool
Enhanced Image Analysis (Image Math, Mode Conversion, Color to RGB)
Expanded Statistics (Parametric/Nonparametric Hypothesis Tests, Survival Analysis
Repeated Measures One-Way and Two-Way ANOVA
Advanced Signal Processing: 2D FFT, Wavelet, STFT
Automatically Update Worksheet Column Calculations
Automatic NLSF Parameter Initialization
Automatic Fitting Comparison Using F-test
Define Fitting Functions Using Origin C
Normality Test (Shapiro-Wilk)
One-Way and Two-Way ANOVA; One Sample and Two Sample t-Test
Survival Analysis (Kaplan-Meier, Cox Proportional Hazards)
Low-Pass, High-Pass, Band-Pass, Band-Block, and Noise Threshold Filters
Peak Analyzer: Find Peaks, Integrate Peaks
Peak Analyzer: Fit Multiple Peaks

User Interface
Password Protection at Project Level
Audit Log of Project Saves, with Optional Password Protection
Unicode Support for Text Labels
Menu Customization: Add New Menu Items or Remove Existing Ones
Shortcuts for Windows in Project Explorer
New Slide Index Column in Project Explorer for Graphs and Layout Pages
Toolbar for Data Markers and Locks
GUI for Defining Variables in Set Values Dialog
Full-Screen View for Graphs, with Aspect Ratio Maintained
More Options in Worksheet Properties Dialog for Formatting Worksheet
Global Setting for Significant Digits
Workbooks and Matrices with Multiple Sheets and Rich Text Cell Formatting
Long Name Support for Windows and Worksheet Columns
Sparklines on Column Headers Display Small Graph of Data for Quick Inspection
Embed Graphs, Images, and Notes in Worksheet Cells
Insert Links in Worksheet Cells to Other Cells, Including Report Sheets
Sampling Interval Support for X-Columns
Workbook Organizer Panel for Workbook/Column Properties and Metadata
Drag Range Selection to Automatically Extend or Duplicate Data
Drag and Drop Sheets to Remove from, or Add to, Workbooks
Click-and-Drag to Adjust Row Height and Column Width in Worksheets and Matrices
Auto-Size Option for Worksheet and Matrix Columns
Multiple Matrix Objects in a Single Matrix Sheet
Cursor Tool and Data Information Box with Support for Multiple Cursors
Tool to Annotate a Specific Data Point
Regional Data Selector/Mask Tool
Categorized Flyout Toolbar Buttons
Lock Icon on Output Columns to Indicate Recalculate Mode: Manual or Auto
Preview of Results in Analysis Dialogs
Quick Help Window with Keyword Search
Option to Switch Language of Interface
New Pack/Unpack Tool with New OPX File Format
Control+Select Non-adjacent Worksheet Columns
In-Place Text Editing
Click-and-Drag to Resize and Rotate Text and Drawing Objects
Drawing tools, Including Poly-Line, Freehand, Polygon, Free-Form
Plot Setup Dialog Simplifies Plotting Data From Multiple Worksheets
Graph Template Library
Formatting Support for Multiple Selected Objects
Object Formatting (Style) Toolbar (Color, Hatch Pattern, Border Type, Border Width)
Text Format toolbar (Font, Size, Bold, Italics, Underline, Sub/Superscript, Greek)
Organize Large Projects with Project Explorer

Application Connectivity
Automation Server Support
Mathematica Link
Matlab Console with GUI Support to Transfer Data Between Origin and Matlab
LabVIEW Connectivity: Improved Sub-VIs and Examples

Programming
LabTalk: Support for User-Defined Functions
Labtalk: Support for Event-Driven Script Execution
LabTalk: More Data Types Supported, Including New Range Data Type
Easy Creation of Custom Tools with Automatic GUI, Using X-Functions
Execute X-Functions from LabTalk Scripts and Menus
Command Window with Auto-Complete Support for Scripting
History Log Displays Previous Script Commands Entered
Origin C: Create Custom Dialogs for Your Routines
Origin C: User-Defined Classes
Origin C: Access to *Full NAG? Mark VII Library
Origin Project (*.OPJ) Files Accept Any Type of File Attachment
C Compiler with ANSI C Language and Origin O
bject Support
Code Builder interface for Color-Coded Editing and Debugging
File Packing/Unpacking Utility with Drag-and-Drop Installation
Run Tools and Wizards Created with MS VC++